Stainless Steel Fittings/Flanges/Rod/Bar Suppliers

Stainless Steel Fittings/Flanges/Rod/Bar Supplier

Stainless Steel Fittings/Flanges/Rod/Bar Suppliers in India

ISO Certified Supplier And Exporter of Stainless Steel Fittings/Flanges/Rod/Bar Suppliers In India. Check Stainless Steel All Grades Equivalent, Chemical Composition & Mechanical Properties in Below.

Global Stainless is a known versatile Supplier and manufacturer of Stainless Steel Fittings/Flanges/Rod/Bar in India. We are Strongest & honestest Distributors of Stainless Steel Material Products with different grades Such as Fittings, Flanges, Sheet Plates, Round Bar & Pipe Tube and so on.



Table of Contant

Stainless Steel Fittings
Stainless Steel Flanges
Stainless Steel Bar and Rod
Stainless Steel Equivalent
Stainless Steel Chemical Composition
Stainless Steel Mechanical Properties

Fittings Types

Specifications Stainless Steel Fittings
Pipe Fittings size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
Pipe Fittings Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504 , BS4504, BS1560, BS10
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Fittings Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60,XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS available with NACE MR 01-75
Buttweld fitting Types Seamless / ERW / Welded / Fabricated Pipe Fittings
Fittings Thread NPT , BSPT, BSPP
FittingsType DN15-DN1200
End Threaded, Welding, JIC
Pressure Rating Threaded end-2000lb/ 3000lb/ 6000lbs Pipe Fittings
Socket-weld end-3000/ 6000/ 9000lbs Pipe Fittings
Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Buttweld Fitting Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Manufacturers of Pipe Fittings
  • Pipe Fittings make Raccortubi S.p.A., Italy
  • Pipe Fittings make Erne Fittings, Austria
  • Pipe Fittings make Melesi, Italy
  • Pipe Fittings make Mega, Italy
  • Pipe Fittings make Ulma, Spain
  • Pipe Fittings make TecnoForge, Italy
  • Pipe Fittings make BENKAN Corporation, Japan
  • Pipe Fittings BKL- Thai Benkan, Thailand
  • Pipe Fittings Lame S.r.l., Italy
  • Pipe Fittings Metal far, Italy
Origin West Europe / Japan / Indian / USA / Korean
Key markets and industries for Pipe Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Specialized manufacturer of 90º Elbows, 45º Elbows, Tees, Crosses, Couplings, Reducers, Inserts, Caps, Nipples, and Unions. Pipe socket weld fittings are available in class 3000, 6000 and 9000. Pipe threaded fittings are available in class 2000, 3000 and 6000. Forged Pipe Fittings - Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows - Female-Female, Male-Female, Male-Male, Union, Nipples, Couplings, Plugs
Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

TYPES OF PIPE FITTINGS

Manufacturer, supplier & distributor of high integrity Butt weld Fittings, producing high quality ANSI B16.9, MSS-SP-43 Buttweld Pipe Fittings. All our buttweld fittings conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Pipe Fittings Manufacturing Standards

ASTM A182 - ASME SA182 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 - Factory-Made Wrought Buttwelding Fittings

ASME B16.11 - Socket Welding and Threaded Forged Fittings

MSS SP-43 - Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

MSS SP-95 - Swage(d) Nipples and Bull Plugs

BS3799 - Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry

Origin & Mills: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin, Indian Mills, Japanese Mills, Korean Mills, European MIlls, US Mills, Russian Mills, Ukraine MIlls

Pipe Fittings Ready Stock

  • High Pressure Pipe Fittings
  • A182 Pipe Fittings
  • A105 Pipe Fittings
  • A105N Pipe Fittings
  • Pipe Fittings
  • A350 LF2 Pipe Fittings
  • Stainless Steel Pipe Fittings
  • Carbon Steel Pipe Fittings
  • Alloy Steel Pipe Fittings
  • A182 F91 Pipe Fittings
  • A182 F22 Pipe Fittings
  • A182 F11 Pipe Fittings
  • A182 F9 Pipe Fittings
  • A182 F5 Pipe Fittings
  • Reducing Coupling
  • Stainless Steel Cross
  • Welding Outlets
  • Full Coupling
  • 3000Lbs Pipe Fittings
  • 6000# Pipe Fittings
  • Pipe Tee
  • Pipe Reducer
  • Coupling
  • A105/A105N Pipe Fittings
  • HEX Head Plug
  • Square Head Plug
  • Round Head Plug
  • 90 Degree Elbows
  • UNS N10276 Pipe Fittings
  • Uns N06022 Pipe Fittings
  • European Pipe Fittings
  • Alloy C-276 Pipe Fittings
  • Alloy C-22 Pipe Fittings manufacturer
  • piping fitting
  • large Pipe Fittings
  • specialty Pipe Fittings
  • ASME B16.11 Pipe Fittings
  • gas Pipe Fittings
  • galvanized Pipe Fittings
  • industrial Pipe Fittings
  • high pressure Pipe Fittings
  • high yield Pipe Fittings
  • Street Elbows Manufacturer
  • ASTM/ASME SA182 F316/L Pipe Fittings
  • EN 10204 3.1 Pipe Fittings
  • ASTM / ASME SB 336 Pipe Fittings
  • Pipe Elbow
  • Pipe Tee
  • Pipe Reducer
  • Coupling
  • ANSI B16.11 Pipe Fittings
  • Pipe Cap
  • Plugs
  • Bushing
  • Reducer Insert
  • Street Elbows
  • Threaded Fittings
  • Pipe Fittings
  • Pipe Outlets
  • Pipe Nipples
  • Hex Nipples
  • Swage Nipples
  • Union
  • 45 Degree Elbows
  • Alloy C-22 Pipe Fittings
  • corrosion resistant alloys Pipe Fittings
  • Welded Pipe Fittings
  • Seamless Pipe Fittings
  • MSS-SP-79 Pipe Fittings
  • WPC276 Pipe Fittings
  • grooved Pipe Fittings
  • banjo Pipe Fittings
  • irrigation Pipe Fittings
  • NPT Pipe Fittings
  • oil Pipe Fittings
  • Pipe Cap
  • Pipe Plugs
  • Bushing
  • Reducer Insert
  • Street Elbows
  • Boss
  • Pipe Elbow
  • Branch Connection Fittings
  • oil and gas Pipe Fittings
  • performance Pipe Fittings
  • sanitary Pipe Fittings
  • nickel-molybdenum-chromium alloy Pipe Fittings
  • ERW Pipe Fittings Manufacturer
  • 45 Degree Branch Outlets
  • ASTM/ASME SA182 F304/L Pipe Fittings
  • MSS-SP-83 Pipe Fittings

1) BUTT WELD FITTINGS

Below are mostly used butt weld fittings, click on below links to get dimensions & diagrams of buttweld fittings:

  • 90 Deg Long Radius Elbow
  • 90 Deg Short Radius Elbow
  • 45 Deg Long Radius Elbow
  • 45 Deg Short Radius Elbow
  • 180 Deg Long Radius Elbow
  • 180 Deg Short Radius Elbow
  • Equal Tee
  • Reducing Tee
  • Concentric/Eccentric Reducer
  • Cross
  • Straight Cross
  • Reducing Cross
  • Concentric Reducer
  • Eccentric Reducer
  • Stub End
  • End Cap/ Pipe Cap
  • Pipe Elbow
  • Pipe Tee
  • Pipe Cross
  • Pipe Reducer
  • Pipe End Cap
  • Pipe Bends
  • Lap Joint
  • IBR Approved Buttweld Fittings
  • Piggable Bend
  • Lateral Tee

1) FORGED FITTINGS

S/W Pipe Fittings & Forged Pipe Fittings

Find latest & comprehensive Variety of socket weld fittings from India & China:

  • Socket Weld Fittings
  • 90 Deg Socket Weld Elbow
  • 45 Deg Socket Weld Elbow
  • Socket Weld Equal Tee
  • Socket Weld Unequal Tee
  • Socket Weld Equal Cross
  • Socket Weld Unequal Cross
  • Socket Weld Full Coupling
  • Socket Weld Half Coupling
  • Socket Weld Pipe Cap
  • Socket Weld Union
  • Socket Weld Reducer Insert
  • Socket Weld Boss
  • 90 Deg Socket Weld Elbow Outlet
  • Socket Weld Boss
  • Socket Weld Lateral Outlet
  • Branch Outlet
  • 90 Deg Elbow Outlet
  • Lateral Outlet
  • Nipple Branch Outlet
  • Socket Weld Fittings
  • Socket Weld Pipe Nipples
  • Socket Weld Pipe Outlet Fittings
  • Socket Weld Swage Nipples | Pipe Swage
  • Socket Weld Branch Outlet

Threaded Pipe Fittings

Buy high pressure and zero defects Threaded Fittings, made from special quality finishing and duress for long life

  • Threaded Fittings
  • 90 Deg Screwed-Threaded Elbow
  • 45 Deg Screwed-Threaded Elbow
  • Equal Tee
  • Unequal Tee
  • Equal Cross
  • Unequal Cross
  • Full Coupling
  • Half Coupling
  • Reducing Coupling
  • Cap
  • Bushing
  • Plug
  • Hex Nipple
  • Street Elbow
  • Bull Plug
  • Welding Boss
  • Swage Nipple
  • Pipe Nipple
  • Adapter
  • Union Male Female
  • Union BS 3799
  • Branch Outlet
  • 90 Elbow Outlet
  • 45 Lateral Tee
  • Lateral Outlet
  • Nipple Branch Outlet
  • Pipe Fittings
  • Union

Threaded and Socket Weld Pipe Fittings

Products Size
90° Elbows Couplings Sizes 1/8" - 4"
Pressure Ratings -
2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
45° Elbows Reducers
Street Elbows Inserts
Tees Caps
Crosses Unions

Long Radius(LR):30,45,90,180 degree
Short Radius(SR):30,45,90,180 degree
1.0D,1.5D,2.0D,2.5D,3D,4D,5D,6D,7D-40D

Tube Fittings

  • Tube to Union
  • Union Tee
  • Reducing Union
  • Bulkhead Union
  • Union
  • Union Elbow
  • Union Cross
  • Tube to Male Fittings
  • Male Connector NPT MCN (Imperial Series)
  • Male Connector NPT-MMCN ( Metric Series)
  • Male Connector BSP - MCB & MMCB
  • Male Connector BSPP MCBP & MMCBP
  • Male Elbow NPT Imperial Series
  • Male Elbow NPT (Metric Series)
  • Male Elbow NPT BSP - MEB & MMEB
  • Male Bulkhead Connector
  • Male Elbow 45 degree
  • Blanking End
  • Blanking Plug
  • Tube Nut
  • Front Ferrule
  • Back Ferrule
  • Hex Plug
  • Allen Key
  • Union Joint Ball
  • Accessories
  • Female cap
  • Male Run Tee
  • Male Branch Tee
  • Tube to Female Pipes
  • Connector NPT Imperial Series
  • Connector NPT Metric Series
  • Connector BSP / BSPP
  • Female Bulkhead Connector
  • Female Elbow
  • Female Run Tee
  • Pipe Fittings
  • Male Tee
  • Female Tee
  • Street Tee
  • Male Female Branch Tee
  • Female Cross
  • Female Elbow
  • Male Elbow
  • Street Elbow
  • 45 degree FEMALE Elbow
  • 45 degree street elbow
  • Male Female Adapter
  • Bushing
  • Hex Coupling
  • Reducing Hex Coupling
  • Hex Nipple
  • Reducing Hex Nipple

High Pressure Socket Weld Pipe Fittings

Pressure Class 3000LBS, 6000LBS, 9000LBS
Socket Weld Pipe Fittings Products Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert
Dimension Specifications ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size 1/8"~4" (DN6~DN100)

High Pressure Threaded Pipe Fittings

Pressure Class 3000LBS, 6000LBS, 9000LBS
Threaded Pipe Fittings Products Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Street Elbow, Coupling, Half Coupling, Reducing Coupling, Cap, Hex Head Bushing, Hex Head Plug, Square Head Plug, Round Head Plug, Bull Plug, Boss, Outlet, Hex Nipple, Swage Nipple
Dimension Specifications ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size 1/8"~4" (DN6~DN100)

Flanges Types

Specifications Stainless Steel Flanges
ASME B16.5 SS Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
SS Flanges Standards ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
SS Alloy Flanges Class / Pressure DIN:PN6 PN10 PN16 PN25 PN40; ANSI:
class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS,
DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc.
JIS: 5K, 10 K, 16 K 20 K,30 K,40 K, 63 K;
Main Types Forged / Threaded / Screwed / Plate
SS Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Types of SS Flanges
  • Weld Neck Ring Flange (WNRF), PGRRRRD
  • Slip-On Ring Flange (SORF), PGRRRRD
  • Blind Ring Flange (BLRF), PGRRRRD
  • Socket Weld Ring Flange (SWRF), PGRRRRD
  • Threaded Ring Flange, PGRRRRD
  • Lap Joint Ring Flange (LJRF), PGRRRRD
  • Ring Type Joint Flange (RTJF), PGRRRRD
Manufacturers of SS Flanges
  • SS Flanges make Raccortubi S.p.A., Italy
  • SS Flanges make Erne Fittings, Austria
  • SS Alloy Flanges make Melesi, Italy
  • SS Flanges make Mega, Italy
  • SS Flanges make Ulma, Spain
  • SS Alloy Flanges make TecnoForge, Italy
  • SS Alloy Flanges make BENKAN Corporation, Japan
  • SS Flanges BKL- Thai Benkan, Thailand
  • SS Flanges Lame S.r.l., Italy
  • SS Flanges Metal far, Italy
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2″) to 200 NB (8″)
Equal and Reducing Configurations

SS Threaded Flange, Slip-On Flange, Socketweld Flange, Weld Neck Flange, Blind Flange

Test Direct-reading Spectrograph,Hydrostatic testing machine,X-ray detector,UI trasonic flaw detector,Magnetic particle detector
Equipment Press machine ,Bending machine,Pushing Machine,electric bevelling machine Sand-blasting machine,etc
Origin West Europe / Japan / Indian / USA / Korean
Specialized manufacturer of SS Blind Flanges, SS Table Flanges, SS Weld Neck Flanges, SS Threaded Flanges, SS Slip-On Flanges, SS Socketweld Flanges, SS Plate Flanges, SS Lap Joint Flanges, SS Loose Flanges, and SS Orifice Flanges. SS AS 4087 Water Flanges are available in class 150, 300, 600, 900, 1500 and 2500
Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S : BS4504 , BS3293, BS1560, BS10
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • AS 2129: table D; table E; table H
  • The other standard:AWWA C207;EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)
Key markets and industries for SS Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Straight Piping Connection Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

TYPES OF SS FLANGES

SS Flanges , producing high quality ANSI B16.9, MSS-SP-43 Flanges. All our Special Steel Flanges conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Threaded Flanges Weld Neck Flanges
Slip On Flanges Socket Weld Flanges
Blind Flanges Lap Joint Flanges
Plate Flanges ASME 16.5 Flanges
Reducing Flanges Orifice Flanges
Nipo Flanges Weldo Flanges
Long Weld Neck Flanges SWRF Flanges
ASME Flanges ASME 16.5 forged Flanges
SORF Flanges Long Welding Neck Flange
Collar Flange Raised Face Flange
Flat Flanges Loose Flanges
Square Flanges Expander Flanges
Ring Type Joint Flanges RTJ
BLRF Flanges Groove & Tongue Flanges
High Hub Blinds Flanges Spectacle Blind Flanges
Weld Neck Flanges Series A or B Spades Ring Spacers Flanges
Screwed Flanges Lip type Flanges
WNRF Flanges Flange Facing Type & Finish
Puddle Flanges Socket Welding Flange
Flat Face Flange Lap Joint Ring Flange

SS Flanges Type / size range

We produce the size range DN15 – DN2500, according to the respective valid norm.

For larger dimensions or dimensions outside the standards please contact us directly

Type Dimension range * Drawing**
SS Blind Flanges
SS Blind Flanges
DN15 – DN2500
½ "- 24"
DIN2527 PN16 DN150 BL 300lb 6 "
SS Threaded with neck
SS Threaded Flanges
DN15 – DN150
½ "- 24"
DIN2566 DN32 / 42.4 TH 300lb 1 "
Flanges smooth for welding DN15 – DN2500 DIN2576 DN150
SS Welding neck
SS Welding Neck Flanges
DN15 – DN2500
½ "- 24"
Dy10 – Dy2400
DIN2635 DN150 / 168.3 WN 300lb 6 "GOST Dy150 Py16
SS loose flanges, smooth Bunde DN15 – DN2500 DIN2642 DN150
SS loose flanges Stub DN15 – DN2500 DIN2673 DN150
SS Welding flanges with neck
SS Slip On Flanges
DN15 – DN2500
½ "- 24"
Dy10 – Dy2400
DIN86030 DN150
SO 300lb 6 "
GOST
SS Lap Joint Flanges ½ "- 24" LJ 300lb 6 "
SS Socket Welding Flanges ½ "- 3" SW 300lb 6 "

Forged and Plate Flanges

Product Size
SS Slip-On Flanges SS Threaded Flanges

1/2" – 36"

Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ),
Lap-Joint Face (LJF), Large Male-Female (LMF),
Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove

SS Weld Neck Flanges SS Socket Weld Flanges
SS Blind Flanges SS Reducing Flanges
SS Lap Joint Flanges SS Plate Flanges

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Max. Pressure
ASME B16.5 Class 150 1/2" FNPT 150 psi
ASME B16.5 Class 150 1/2" FNPT 150 psi
ASME B16.5 Class 150 1/2" Socket Weld 275 psi
ASME B16.5 Class 150 1/2" Welded 150 psi
ASME B16.5 Class 150 3/4" FNPT 150 psi
ASME B16.5 Class 150 3/4" FNPT 150 psi
ASME B16.5 Class 150 3/4" Socket Weld 275 psi
ASME B16.5 Class 150 3/4" Welded 150 psi
ASME B16.5 Class 150 3/4" Welded 150 psi
ASME B16.5 Class 150 1" FNPT 150 psi
ASME B16.5 Class 150 1" FNPT 150 psi
ASME B16.5 Class 150 1" Socket Weld 275 psi
ASME B16.5 Class 150 1" Welded 150 psi
ASME B16.5 Class 150 1" Welded 150 psi
ASME B16.5 Class 150 1-1/4" FNPT 150 psi
ASME B16.5 Class 150 1-1/4" FNPT 150 psi
ASME B16.5 Class 150 1-1/4" Socket Weld 275 psi
ASME B16.5 Class 150 1-1/4" Welded 150 psi
ASME B16.5 Class 150 1-1/4" Welded 150 psi
ASME B16.5 Class 150 1-1/2" FNPT 150 psi
ASME B16.5 Class 150 1-1/2" FNPT 150 psi
ASME B16.5 Class 150 1-1/2" Socket Weld 275 psi
ASME B16.5 Class 150 1-1/2" Welded 150 psi
ASME B16.5 Class 150 1-1/2" Welded 150 psi
ASME B16.5 Class 150 2" FNPT 150 psi
ASME B16.5 Class 150 2" FNPT 150 psi
ASME B16.5 Class 150 2" Socket Weld 275 psi
ASME B16.5 Class 150 2" Welded 150 psi
ASME B16.5 Class 150 2" Welded 150 psi
ASME B16.5 Class 150 2-1/2" FNPT 150 psi
ASME B16.5 Class 150 2-1/2" FNPT 150 psi
ASME B16.5 Class 150 2-1/2" Socket Weld 275 psi
ASME B16.5 Class 150 2-1/2" Welded 150 psi
ASME B16.5 Class 150 2-1/2" Welded 150 psi
ASME B16.5 Class 150 3" FNPT 150 psi
ASME B16.5 Class 150 3" FNPT 150 psi
ASME B16.5 Class 150 3" Socket Weld 275 psi
ASME B16.5 Class 150 3" Welded 150 psi
ASME B16.5 Class 150 4" FNPT 150 psi
ASME B16.5 Class 150 4" FNPT 150 psi
ASME B16.5 Class 150 4" Socket Weld 275 psi
ASME B16.5 Class 150 4" Welded 150 psi
ASME B16.5 Class 150 4" Welded 150 psi
ASME B16.5 Class 150 6" FNPT 150 psi
ASME B16.5 Class 150 6" FNPT 150 psi
ASME B16.5 Class 150 6" Welded 150 psi
ASME B16.5 Class 150 6" Welded 150 psi
ASME B16.5 Class 300 1/2" FNPT 720 psi
ASME B16.5 Class 300 1/2" FNPT 720 psi
ASME B16.5 Class 300 1/2" Slip On 720 psi
ASME B16.5 Class 300 1/2" Slip On 720 psi
ASME B16.5 Class 300 3/4" FNPT 720 psi
ASME B16.5 Class 300 3/4" FNPT 720 psi
ASME B16.5 Class 300 1" FNPT 720 psi
ASME B16.5 Class 300 1" FNPT 720 psi
ASME B16.5 Class 300 1" Slip On 720 psi
ASME B16.5 Class 300 1" Slip On 720 psi
ASME B16.5 Class 300 1-1/4" FNPT 720 psi
ASME B16.5 Class 300 1-1/4" FNPT 720 psi
ASME B16.5 Class 300 1-1/4" Slip On 720 psi
ASME B16.5 Class 300 1-1/2" FNPT 720 psi
ASME B16.5 Class 300 1-1/2" FNPT 720 psi
ASME B16.5 Class 300 1-1/2" Slip On 720 psi
ASME B16.5 Class 300 1-1/2" Slip On 720 psi
ASME B16.5 Class 300 2" FNPT 720 psi
ASME B16.5 Class 300 2" FNPT 720 psi
ASME B16.5 Class 300 2" Slip On 720 psi
ASME B16.5 Class 300 2" Slip On 720 psi
ASME B16.5 Class 300 2-1/2" FNPT 720 psi
ASME B16.5 Class 300 2-1/2" FNPT 720 psi
ASME B16.5 Class 300 2-1/2" Slip On 720 psi
ASME B16.5 Class 300 2-1/2" Slip On 720 psi
ASME B16.5 Class 300 3" FNPT 720 psi
ASME B16.5 Class 300 3" FNPT 720 psi
ASME B16.5 Class 300 3" Slip On 720 psi
ASME B16.5 Class 300 3" Slip On 720 psi
ASME B16.5 Class 300 4" FNPT 720 psi
ASME B16.5 Class 300 4" FNPT 720 psi
ASME B16.5 Class 300 4" Slip On 720 psi
ASME B16.5 Class 300 4" Slip On 720 psi

Stainless Steel Bar Types

Specification / Grade Stainless Steel Bar 304, 304 L, 316, 316 L - Stainless Steel Flat Bar | Grade 304, 316 & 430
Round bar size Diameter: 3mm~800mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Square bar size 4mm*4mm~100mm*100mm
Flat bar size Thickness: 2mm~100mm
Width: 10mm~500mm
Hex Bar size 2mm~100mm
Billet Size 1/2" to 495mm Diameter
Rectangles Size 33mm x 30mm to 295mm x 1066mm
Round Bar Standard Dimensions  Diameter / Height:

Finish Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar
Technique Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod
Form Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc.
Our round bar conforms to NACE MR0175/ISO 15156

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish 3.00 – 75.00 1/8" – 3.00" h8-h9-h10-h11
Cold Drawn and Ground 10.00 – 75.00 5/6" – 2.50" h8-h9-h10-h11
Peeled and Polished 40.00 – 150.00 1.50" – 6.00" h11, h11-DIN 1013
Peeled and Ground 20.00 – 50.00 3/4″ – 2.00" h9-h10-h11

Types of Bars

Cold Finished Bar Suppliers, Round Bar stockist, Forged Round Bars, supplier of Hexagon Bars, Polished Bar, Hot Rolled Bar Stock Holder, Bar

Rectangular Bar Flat Bar
T-Bar Rounds
Square Bar Half-Round Bar
Round Bar Hexagonal Bar
Threaded Bar Rebar
Hollow Bar Precision Ground Bar
Precision Ground Stock Triangle bar
Rod Hex Bar

Sizes: Round Bar Stock

  • 6 mm Ø Round Bar
  • 8 mm Ø Round Bar
  • 10 mm Ø Round Bar
  • 12 mm Ø Round Bar
  • 16 mm Ø Round Bar
  • 20 mm Ø Round Bar
  • 25 mm Ø Round Bar
  • 30 mm Ø Round Bar
  • 40 mm Ø Round Bar
  • 44.45 mm Ø Round Bar
  • 45 mm Ø Round Bar
  • 50 mm Ø Round Bar
  • 80.0 mm Ø Round Bar
  • 90.0 mm Ø Round Bar
  • 101.6 mm Ø Round Bar
  • 20.0 mm Ø Round Bar
  • 25.4 mm Ø Round Bar
  • 32.0 mm Ø Round Bar
  • 35.0 mm Ø Round Bar
  • 40.0 mm Ø Round Bar
  • 45.0 mm Ø Round Bar
  • 50.8 mm Ø Round Bar
  • 63.5 mm Ø Round Bar
  • 76.2 mm Ø Round Bar
  • 60 mm Ø Round Bar
  • 12.7 mm Ø Round Bar
  • 16.0 mm Ø Round Bar
  • 114.3 mm Ø Round Bar
  • 127.0 mm Ø Round Bar
  • 152.4 mm Ø Round Bar

Hexagon Rods

  • SW 13 Hex Rod
  • SW 17 Hex Rod
  • SW 19 Hex Rod
  • SW 24 Hex Rod
  • SW 27 Hex Rod

Bars stock list

Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

5.0 mm 45.0 mm
6.0 mm 50.0 mm
7.0 mm 55.0 mm
8.0 mm 60.0 mm
9.0 mm 65.0 mm
10.0 mm 70.0 mm
12.0 mm 75.0 mm
16.0 mm 80.0 mm
20.0 mm 90.0 mm
25.0 mm 100.0 mm
30.0 mm 130.0 mm
35.0 mm 160.0 mm
40.0 mm 200.0 mm

INTERNATIONAL STANDARDS CONVERSION TABLE
FOR STAINLESS STEEL
Including Chemical Composition & Mechanical Properties

U.S.A. GERMANY  GERMANY FRANCE  JAPAN   ITALY  SWEDEN U.K.  E.U. SPAIN  RUSSIA 
AISI DIN 17006 W.N. 17007 AFNOR JIS UNI  SIS BSI EURONORM UNE GOST
201 SUS 201
301 X 12 CrNi 17 7 1.4310 Z 12 CN 17-07 SUS 301 X 12 CrNi 1707  23 31 301S21 X 12 CrNi 17 7 X 12 CrNi 17-07
302 X 5 CrNi 18 7 1.4319 Z 10 CN 18-09 SUS 302 X 10 CrNi 1809 23 31 302S25 X 10 CrNi 18 9 X 10 CrNi 18-09 12KH18N9
303 X 10 CrNiS 18 9 1.4305 Z 10 CNF 18-09 SUS 303 X 10 CrNiS 1809 23 46 303S21 X 10 CrNiS 18 9 X 10 CrNiS 18-09
303 Se Z 10 CNF 18-09 SUS 303 Se X 10 CrNiS 1809 303S41 X 10 CrNiS 18-09 12KH18N10E
304 X 5 CrNi 18 10 X 5 CrNi 18 12 1.4301 1.4303 Z 6 CN 18-09 SUS 304 X 5 CrNi 1810 23 32 304S15  304S16 X 6 CrNi 18 10   X 6 CrNi 19-10 08KH18N10 06KH18N11
304 N SUS 304N1 X 5 CrNiN 1810
304 H SUS F 304H X 8 CrNi 1910 X 6 CrNi 19-10
304 L X 2 CrNi 18 11 1.4306 Z 2 CN 18-10 SUS 304L X 2 CrNi 1911 23 52 304S11  X 3 CrNi 18 10 X 2 CrNi 19-10 03KH18N11
X 2 CrNiN 18 10 1.4311 Z 2 CN 18-10-Az SUS 304LN X 2 CrNiN 1811 23 71
305 Z 8 CN 18-12 SUS 305 X 8 CrNi 1812 23 33 305S19 X 8 CrNi 18 12 X 8 CrNi 18-12
Z 6 CNU 18-10 SUS XM7 X 6 CrNiCu 18 10 4 Kd
309 X 15 CrNiS 20 12 1.4828 Z 15 CN 24-13 SUH 309 X 16 CrNi 2314 309S24 X 15 CrNi 23 13
309 S SUS 309S X 6 CrNi 2314 X 6 CrNi 22 13
310 X 12 CrNi 25 21 1.4845 SUH 310 X 22 CrNi 2520 310S24 20KH23N18
310 S X 12 CrNi 25 20 1.4842 Z 12 CN 25-20 SUS 310S X 5 CrNi 2520 23 61 X 6 CrNi 25 20 10KH23N18
314 X 15 CrNiSi 25 20 1.4841 Z 12 CNS 25-20 X 16 CrNiSi 2520 X 15 CrNiSi 25 20 20KH25N20S2
316 X 5 CrNiMo 17 12 2 1.4401 Z 6 CND 17-11 SUS 316 X 5 CrNiMo 1712 23 47 316S31 X 6 CrNiMo 17 12 2 X 6 CrNiMo 17-12-03
316 X 5 CrNiMo 17 13 3 1.4436 Z 6 CND 17-12 SUS 316 X 5 CrNiMo 1713 23 43 316S33 X 6 CrNiMo 17 13 3 X 6 CrNiMo 17-12-03
316 F X 12 CrNiMoS 18 11 1.4427
316 N SUS 316N
316 H SUS F 316H X 8 CrNiMo 1712 X 5 CrNiMo 17-12
316 H X 8 CrNiMo 1713 X 6 CrNiMo 17-12-03
316 L X 2 CrNiMo 17 13 2 1.4404 Z 2 CND 17-12 SUS 316L X 2 CrNiMo 1712 23 48 316S11 X 3 CrNiMo 17 12 2 X 2 CrNiMo 17-12-03 03KH17N14M2
X 2 CrNiMoN 17 12 2 1.4406 Z 2 CND 17-12-Az SUS 316LN X 2 CrNiMoN 1712
316 L X 2 CrNiMo 18 14 3 1.4435 Z 2 CND 17-13 X 2 CrNiMo 1713 23 53 316S13 X 3 CrNiMo 17 13 3 X 2 CrNiMo 17-12-03 03KH16N15M3
X 2 CrNiMoN 17 13 3 1.4429 Z 2 CND 17-13-Az X 2 CrNiMoN 1713 23 75
X 6 CrNiMoTi 17 12 2 1.4571 Z6 CNDT 17-12 X 6 CrNiMoTi 1712 23 50 320S31 X 6 CrNiMoTi 17 12 2 X 6 CrNiMoTi 17-12-03 08KH17N13M2T 10KH17N13M2T
X 10 CrNiMoTi 18 12 1.4573 X 6 CrNiMoTi 1713 320S33 X 6 CrNiMoTI 17 13 3 X 6 CrNiMoTi 17-12-03 08KH17N13M2T 10KH17N13M2T
X 6 CrNiMoNb 17 12 2 1.4580 Z 6 CNDNb 17-12 X 6 CrNiMoNb 1712 X 6 CrNiMoNb 17 12 2 08KH16N13M2B
X 10 CrNiMoNb 18 12 1.4583 X 6 CrNiMoNb 1713  X 6 CrNiMoNb 17 13 3 09KH16N15M3B
317 SUS 317 X 5 CrNiMo 1815 23 66 317S16
317 L X 2 CrNiMo 18 16 4 1.4438 Z 2 CND 19-15 SUS 317L X 2 CrNiMo 1815 23 67 317S12 X 3 CrNiMo 18 16 4
317 L X 2 CrNiMo 18 16 4 1.4438 Z 2 CND 19-15 SUS 317L X 2 CrNiMo 1816 23 67 317S12 X 3 CrNiMo 18 16 4
330 X 12 NiCrSi 36 16  1.4864 Z 12NCS 35-16  SUH 330 
321 X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 1.4541  1.4878 Z 6 CNT 18-10 SUS 321 X 6 CrNiTi 1811 23 37 321S31 X 6 CrNiTi 18 10 X 6 CrNiTi 18-11 08KH18N10T
321 H SUS 321H X 8 CrNiTi 1811 321S20 X 7 CrNiTi 18-11 12KH18N10T
329 X 8 CrNiMo 27 5 1.4460 SUS 329J1 23 24
347 X 6 CrNiNb 18 10 1.4550 Z 6 CNNb 18-10 SUS 347 X 6 CrNiNb 1811 23 38 347S31 X 6 CrNiNb 18 10 X 6 CrNiNb 18-11 08KH18N12B
347 H SUS F 347H X 8 CrNiNb 1811 X 7 CrNiNb 18-11
904L 1.4939  Z 12 CNDV 12-02 
X 20 CrNiSi 25 4 1.4821
UNS31803 X 2 CrNiMoN 22 5 1.4462
UNS32760 X 3 CrNiMoN 25 7 1.4501 Z 3 CND 25-06Az
403 X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 1.4000  1.4006  1.4024 Z 12 C 13 SUS 403 X 12 Cr 13 23 02 403S17 X 10 Cr 13 X 12 Cr 13 X 6 Cr 13 12Kh13
405 X 6 CrAl 13 1.4002  Z 6 CA 13 SUS 405 X 6 CrAl 13 405S17 X 6 CrAl 13 X 6 CrAl 13
X 10 CrAl 7 1.4713 Z 8 CA 7 X 10 CrAl 7
X 10 CrAl 13 1.4724 X 10 CrAl 12 10Kh13SYu
X 10 CrAl 18 1.4742 X 10 CrSiAl 18  15Kh18SYu
409 X 6 CrTi 12 1.4512 Z 6 CT 12 SUH 409 X 6 CrTi 12 409S19 X 5 CrTi 12
X 2 CrTi 12
410 X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 1.4000  1.4006  1.4024 Z 10 C 13 Z 12 C 13 SUS 410 X 12 Cr 13 23 02 410S21 X 12 Cr 13 X 12 Cr 13 12Kh13
410 S X 6 Cr 13 1.4000 Z 6 C 13 SUS 410S X 6 Cr 13 23 01 403S17 X 6 Cr 13 08Kh13
414
These are austenitic grades
These are ferritic grades
These are ferritic-austenitic grades ( otherwise known as Duplex and Superduplex)

Stainless Steel Chemical Composition

Standard of Country Chemical Composition
USA German UK Japan C Max SI Max Mn Max P max S Max Ni Cr Mo
AISI W-Nr DIN KURZNAME BS JIS
301 1.4310 X12Cr Ni 177 301S21 SUS 301 0.15 1 2 0.045 0.03 6.00-8.00 16.00-18.00  -
304 1.4301 XDCr Ni 189 304S16 SUS304 0.08 1 2 0.045 0.03 8.00-10.50 18.00-20.00  -
304L 1.4306 X3Cr Ni 89 304S12 SUS 304L 0.03 1 2 0.045 0.03 9.00-13.00 18.00-20.00 -
305 1.4303 X5Cr Ni 1911 305S19 SUS 305 0.12 1 2 0.045 0.03 10.50-13.00 17.00-19.00  -
310S 1.4841 X 15 Cr Ni Si 2520 310S24 SUS 310S 0.08 1.5 2 0.045 0.03 19.00-22.00 24.00-26.00  -
316 1.4401 X15 Cr Ni Mo 1810 306S16 SUS 316 0.08 1 2 0.045 0.03 10.00-14.00 16.00-18.00 2.00-3.00
316L 1.4435 X15 Cr Ni Mo 1812 306S12 SUS 316 L 0.03 1 2 0.045 0.03 12.00-15.00 16.00-18.00 2.00-3.00
430 1.4016 X8Cr 17 430S17 SUS 430 0.12 0.75 1 0.04 0.03 0.6 16.00-18.00  -
434 1.4113  -  - SUS 434 0.12 1 1 0.04 0.03 0.6 16.00-18.00 0.75-1.25
410 1.4006 X10 Cr 13 410S21 SUS 410 0.15 1 1 0.04 0.03 0.6 11.50-13.50  -
420 1.4021 X 20 Cr 13 420S29 SUS 420 J1 0.16-0.25 1 1 0.04 0.03 0.6 12.00-14.00 -
420 1.4034 X 40 Cr 13 420S45 SUS 420 J2  0.26 - 0.40 1 1 0.04 0.03 0.6 12.00-14.00  -

Stainless Steel Mechanical Properties

USA German UK Japan Tensile test(min) Hardness (Max)
AISI W-Nr DIN KURZNAME BS JIS Y/S T/S Elongat-ion HB HRB Hv
kg/mm2 N/mm2 kgf/mm2 N/mm2
301 1.4310 X12Cr Ni 177 301S21 SUS 301 21 206 53 520 40 187 90 200
304 1.4301 XDCr Ni 189 304S16 SUS304 21 206 53 520 40 187 90 200
304L 1.4306 X3Cr Ni 89 304S12 SUS 304L 18 177 49 481 40 187 90 200
305 1.4303 X5Cr Ni 1911 305S19 SUS 305 18 177 49 481 40 187 90 200
310S 1.4841 X 15 Cr Ni Si 2520 310S24 SUS 310S 21 206 53 520 40 187 90 200
316 1.4401 X15 Cr Ni Mo 1810 306S16 SUS 316 21 206 53 520 40 187 90 200
316L 1.4435 X15 Cr Ni Mo 1812 306S12 SUS 316 L 18 177 49 481 40 187 90 200
430 1.4016 X8Cr 17 430S17 SUS 430 21 206 46 451 22 183 88 200
434 1.4113  -  - SUS 434 21 206 46 451 22 183 88 200
410 1.4006 X10 Cr 13 410S21 SUS 410 21 206 45 441 20 200 93 210
420 1.4021 X 20 Cr 13 420S29 SUS 420 J1 23 226 53 520 18 223 97 234
420 1.4034 X 40 Cr 13 420S45 SUS 420 J2 23 226 55 539 18 235 99 247